Liming Stamping Form Machine Co.,Ltd
Your industry is our industry
Add to Cart
Galvanized Metal Rain Gutter Profile Cold Rolling Forming Machine
The whole set of "galvanized metal rain gutter profile cold rolling forming machine " can be matched with different molds to complete the entire production requirements. Therefore, users should pay attention to the production line speed and mechanical configuration when choosing a groove forming machine. These requirements have an impact on the entire price on the "Electro-galvanized Rain Gutter Profile Cold Rolling Forming Machine".
The"galvanized metal rain gutter profile cold rolling forming machine " must repair the galvanized gutter. When the scratches do not cause leakage, the two annular fillet welds between the casing and the steel pipe body do not need to be welded. If it leaks, welding is required.
The benefits of installing the gutter on the"galvanized metal rain gutter profile cold rolling forming machine "
There is no rain gutter on the roof of a traditional house, and rainwater flows down the outer wall of the house, leaving water stains directly and seriously affecting the service life of the outer wall of the house.
The ground will also form gutters or stagnant water due to rain, which will affect your travel and cause damage to the base of your building.
The function of rain gutter is to extend the service life of the building, so we solemnly recommend that you choose "galvanized metal rain gutter profile cold rolling forming machine " to install rain gutter
Main parameters of Galvanized Metal Rain Gutter Profile Cold Rolling Forming Machine
| No. | main parameter of gutter roll forming machine | |
| 1 | Suitable to process | Color steel plate |
| 2 | Width of the plate | 200-600mm |
| 3 | Rollers | 16-20rows |
| 4 | Dimensions | 8.6*0.8*1.2m |
| 5 | Power | 4+3kw |
| 6 | Thickness of the plate | 0.3-0.8mm |
| 7 | Productivity | 8-14 m/min |
| 8 | Diameter of the roller | 52mm |
| 9 | Weight | About 5 T |
| 10 | Voltage | 380V 50Hz 3phases |
| 11 | Rolling material | Carbon Steel 45# |
| 12 | Material of the cutting plate | Cr12 |
| 13 | Processing precision | Within 1.00mm |
| 14 | Control system | PLC control |
| 15 | Side panel of machine | 14mm |
| 16 | Main structure of the machine | 300 H steel |
