Liming Stamping Form Machine Co.,Ltd
Your industry is our industry
Add to Cart
C-shaped keel roll forming machine for decoration is equipment used to produce c-shaped keel.
Because the C-shaped keel has the advantages of easy installation, corrosion resistance and good load-bearing capacity, it is widely used in hotels, terminal buildings, passenger stations, stations, theaters, shopping malls, factories, office buildings, old buildings, renovations, interior decoration settings, ceilings And other places.
The C-type keel forming machine is composed of an uncoiler, a feeding device, a roll forming unit, a hydraulic die cutting device, and a receiving device. The whole machine is controlled by a plc system, and the operation is simple, which can help you save labor costs.
The C-type keel forming machine uses Omron encoders to automatically measure the length, so that the products produced are accurate in size and consistent in length, so as to achieve the purpose of direct installation and sales.
The C-type keel forming machine is also equipped with a servo shearing device, which keeps the shearing device at the same speed as the product, and the cut section is clean and free of burrs, which helps you greatly improve your work efficiency.
At the same time, we also designed and installed a protective device for the C-shaped keel forming machine to ensure that you can safely and quickly produce and avoid personnel and equipment damage.
Technical parameters of C-type keel roll forming machine for decoration
| Material | Colored steel sheet, galvanized steel sheet, aluminum sheet |
| Thickness of coil sheet | 0.3-0.8 mm |
| Roller material | High grade 45# forged steel, surface hard chromium plating |
| Shaft material | High grade 45# forged steel |
| Cutting blade | Cr12 mould steel with quenched treatment |
| Diameter of shaft | 50mm or as your requirement |
| Main frame | 300 H steel |
| Forming steps | 14 stations |
| Productivity | 10-15m/min |
| Hydraulic station power | 5.5 KW |
| Hydraulic pressure | 10-12MPa |
| Appearance size | 6.5*1.5*1.5 m |
| Hydraulic oil | 40# hydraulic oil |
| Electric tension | 380V 50 Hz 3 Phase or as your requirement |
| Cut Mode | Hydraulic forming after cutting off |
| Cutter materia | Cr12Heat Treatment |
| Electronic control system | PLC, Touch Screen, Encoding counter |
| Color | Blue, green or yellow or as your requirement |
| Rolling material | 45# steel,roller surfaces polishing, hard plating |