Liming Stamping Form Machine Co.,Ltd
Your industry is our industry
Add to Cart
Our common shelf column forming machine uses a punch to punch the shelf column. It is necessary to ensure that the forming speed of the shelf column forming machine host is consistent with the punching speed of the punching machine to maintain continuous and normal production. However, the shelf column is formed The production speed of the machine cannot be adjusted, only a constant speed can be maintained.
The new generation of shelf column forming machine developed by Liming Company breaks the conventional punching method and adopts the newly developed roll punching to achieve the purpose of adjusting the punching speed. At the same time, we also use a reducer transmission method. Enhance the power of the shelf column forming machine, which can help you quickly produce shelf column products.
The shelf column forming machine is also equipped with a three-piece knife cutting device, which makes the section of the cut product clean and without secondary processing, which can help you save a lot of manpower costs.
Technical parameters of Windproof And Shockproof Solar PV Bracket Roll Forming Machine
| No. | Solar PV Bracket Roll Forming Machine | |
| 1 | Length of the main part | 9.5*1.5*1.2m |
| 2 | Weight of main part | About 6 t |
| 3 | Voltage | 380V/50HZ3Phase (as customer’s request) |
| 4 | Roller fixer | Guide column |
| 5 | Frame | Middle plate welded |
| Memorial arch frame type | ||
| 6 | Frame thickness | 25mm |
| 7 | Drive mode | Gear or chain |
| 8 | Material of rollers | 45# steel with tempering |
| 9 | Material of shafts | 45# steel with tempering |
| 10 | Diameter of shafts | φ40mm |
| 11 | Number of rollers | 10 rollers |
